分享好友 看资讯首页 频道列表

Marine Airbags for Launch and Land Ships

2011-06-082370
 the use of marine airbags to launch a ship and to land it back in a dock is a very novel process. The concept was developed in the year 1981 in the Jinan province of China. In these past thirty years, this concept has undergone a lot of development and revolution and is now one of the most recognised methods of launching and landing a ship.

 

 

The use of airbags helps to remove the hindrance of using tows and tugs as launching and landing instruments. Moreover since the airbags use synthetic rubber and a high defined system as their core design, it has become easy to use such airbags for any ship that has a DWT (Dead Weight Tonnage) of less than 55,000.

Additionally, the revolution carried out in the process of using airbags as launching tools also has the advantage of being used for any kind of ship. This factor is very important because in the initial days when the marine airbags were newly launched in the shipping industry, only small boats which were flat-bottomed could use the facility of a marine airbag.

Another most important advantage of using an airbag for the purpose of launching ships is that the process is re-doable. The airbags after they have served the purpose of either launching a ship or landing a ship in a dock can be pressed out of the inflating gas and then folded for using them again at some future date. This ensures that there is no extra financial burden involved unlike when the more traditional methods of ship launching and shoring are used.

Also since these airbags come with abrasion-free coating and are resistant to any sort of piercing, they ensure that the process of using marine airbags can be repeated many times over. This again contributes to the investing rate of a shipping company or owner being quite less than what they would be contributing while opting for the more conventional methods of plunging a ship into the water.

Another important feature of a marine airbag is that it is not only used in ships but also in other marine areas like naval salvage, launching of caissons (large watertight chambers used for underwater construction purposes) and floating docks. The technology of marine airbags is such that if it is developed further, it can be used in many other important and necessary marine areas.

It has to be understood that in order to use marine airbags in the shipping sector, there needs to be adequate space for the purpose of launching and shoring a ship. Because if there is an absence of space, then it could lead to the airbags not being inflated properly thus causing accidents to a ship or boat thus using the airbags.

A marine airbag is something that has come up a long way in the three decades of its first being used. Given the way the technology is peaking in today’s times, it is very obvious that could achieve even more development in the days to come. Further development and up-gradation for this particular system, would mean that naval hauling and trucking could be something that even non-naval users be proud and appreciative about.

反对 0
举报 0
收藏 0
打赏 0
ST Marine“Pacific Dispatch”轮采用船舶气囊下水工艺成功下水
采用气囊柔性下水方式, ST Marine为Swire Pacific Offshore Operations (Pte) Ltd. (SPO) 建造的Pacific Dispatch号锚操拖供应

0评论2014-01-0929

67 piece marine airbags Launch SINOPECs biggest Pipelaying barge
 Marine airbags ship launching can help shipbuilding company to do a better work with less investment. Some people call

0评论2011-06-08267

The most complicated airbag ship launching project
 Marine airbag ship launching technology is developing fast nowdays and at the same time it is required to be competent

0评论2011-06-08258

Landing craft launch with Evergreen marine airbags
 Strategic Marine has delivered a 48.5 metre landing craft which will service the Australian offshore oil and gas indus

0评论2011-06-08239

Ship launch airbag of Evergreen
 The flexibility of ship launch airbags can remedy the practical limitations in the marine projects. By adjusting the i

0评论2011-06-08245

by marine airbags DWT 8,800 tons cargo vessel in Vietnam launching
Eversafe engineering team successfully launched a DWT 8,800 tons cargo vessel named Ocean bravis with 30 pcs Evergreen m

0评论2011-06-08228

Marine rubber airbags-Made in China, serve globe
Evergreen marine air bag employs the advanced whole enlacing technology which demands the intertwist of each layers with

0评论2011-06-08230

Evergreen marine Airbags launch DWT 23800 cargo ship
DWT 23800 cargo ship named Chang An 189 was successfully launched by Eversafe engineering teams with Evergreen marine ai

0评论2011-06-08232

CNOOC Launches Vessels with Marine Airbags
Eversafe marine engineering company is a professional team who engage in marine airbag ship launching and fender design.

0评论2011-06-08209